نوع مقاله : مقاله پژوهشی
عنوان مقاله English
نویسندگان English
Large waves generated in seas and oceans by various factors can cause considerable financial and human losses in coastal areas. The use of protective seawalls is considered an effective approach; however, their performance has received relatively limited attention. The subject of this study is the impact of a single wave on a movable seawall located on an inclined surface. The displacement and seaward movement of the wall toward the shore and existing structures, as well as the wave run-up over the wall, are important factors for coastal protection. To investigate these aspects, different values of the slope angle, wave height, and stiffness of the spring connected to the wall are considered for a specified wall mass. The flow is simulated using the meshless Smoothed Particle Hydrodynamics (SPH) numerical method. The analysis of the results indicates that, regardless of the spring stiffness and wave height, the maximum seawall displacement occurs at a specific slope angle. The intensity of variations in wall displacement for different wave heights also occurs at this same specific slope angle. At this slope angle, the wall displacement exhibits the greatest sensitivity to changes in spring stiffness. Furthermore, at slope angles greater than the specified slope, the wave run-up over the wall does not increase substantially. The results of this study can provide guidance for the design of protective seawalls under real-world conditions.
کلیدواژهها English