Hydrophysics

Hydrophysics

Reliability analysis of a pipe containing high pressure and temperature moving gas

Document Type : Original Article

Authors
Mohammad Shirzadifar 1
Ali Abdollahifar 2
1 Faculty of Naval Aviation.Malek-ashtar University of technology
2 Faculty of Naval Aviation, Malek- Ashtar University of Technology
Abstract
Reliability science is based on statistics and probability, and the possibility representation of healthiness of the product. Understanding the likeliness of health or deterioration of the product is very valuable. Hence, in recent years reliability engineering has become very important for researchers and designers. Nowadays one of the most important parameters in the industry is high reliability products and this is because of its direct link to the user's health and well-functioning industrial products. Working with systems that have a low reliability are very dangerous. The oil and gas are very important industries and one of the most important elements in the installation of a refinery are pipes.
Hence, in this study the dynamic stress and reliability analysis of a piping under gas with high pressure and temperature will be discussed. Therefore, the finite element and Monte-Carlo methods were used to compute stress and reliability in the pipe with high pressure and temperature. In order to verify this presented code and its results were compared with ANSYS software and other existing results.
Keywords
Oil and Gas Industries
Pipe
Reliability
High Pressure and Temperature
Dynamic Stress Analysis

Subjects

[1] Thoft-Cristensen P, Baker MJ. Structural reliability theory and its applications. Springer Science & Business Media; 2012 Dec 6.
[2] Blischke WR, Murthy DP. Reliability: modeling, prediction, and optimization. John Wiley & Sons; 2011 Sep 20.
 [3] Gardoni P. Risk and reliability analysis. Springer International Publishing; 2017.
 [4] Kadry S, El Hami A. Numerical methods for reliability and safety assessment. Springer; 2015.
 [5] Grubišić M, Ivošević J, Grubišić A. Reliability analysis of reinforced concrete frame by finite element method with implicit limit state functions. Buildings. 2019 May 10;9(5):119.
[6] Huang C, Lin K. A method for reliability assessment of aircraft structures subject to accidental damage. In46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 2005 Apr 18 (p. 1830).
[7] Kim WT, Choi MY, Huh YH, Eom SJ. Measurement of thermal stress and prediction of fatigue for STS using Lock-in thermography. Proc. 12th A-PCNDT. 2006.
[8] Peng LC. Stress analysis methods for underground pipelines. Pipe Line Industry. 1978 May;47(5):65-74.
[9] Jain S, Agrawal A. Coupled Thermal-Structural Finite Element Analysis for Exhaust Manifold of an Off-Road Vehicle Diesel Engine. International Journal of Soft Computing and Engineering (IJSCE). 2013 Sep;3:226-3.
[10] Bian S, Li W. Calculation of thermal stress and fatigue life of 1000 MW steam turbine rotor. Energy and Power Engineering. 2013 Jun 30;5(4):1484-9.
[11] Horgan CO, Chan AM. The stress response of functionally graded isotropic linearly elastic rotating disks. Journal of Elasticity. 1999 Jun;55:219-30.
[12] Chen J, Ding H, Chen W. Three-dimensional analytical solution for a rotating disc of functionally graded materials with transverse isotropy. Archive of Applied Mechanics. 2007 Apr;77:241-51.
[13] احمدی حمید، بایرامی مهدی، لطف اللهی یقین محمدعلی. ارزیابی حساسیت مقاومت استاتیکی اتصالات لوله‌ای K سکوهای فراساحلی جکتی نسبت به عوامل تصادفی مؤثر بر مبنای تحلیل قابلیت اعتماد. فصلنامه دریا فنون. 1398؛ 6(1): 94-109.
[14] افشاری ابراهیم، بنی اسدی احسان، شاکرمی نگار، اطیابی سید علی، اصغری سعید. شبیه‌ سازی عددی و تحلیل پارامتری یک لوله حرارتی جهت کاربرد در سامانه های هوافضایی. دوفصلنامه دانش و فناوری هوافضا. 1399؛ 9(1): 247-260.
[15] کوکما معصومه، امامی آزادی محمدرضا، کاردان نازیلا. ارزیابی لرزه‌ای خط لوله گاز فرا ساحل در ساحل خلیج فارسی و تحلیل قابلیت اعتماد آن با لحاظ نمودن اندرکنش خاک و لوله. نشریه مهندسی سازه و ساخت. 1403؛ 11(9): 5-26.
[16] حقیقی مهدی، دلنوازعلی، رشوند پوریا، دلنواز محمد، ارزیابی آسیب‌پذیری منابع آب زیرزمینی بر اساس شکست خط لوله انتقال سوخت تحت شرایط وقوع زمین‌لرزه با استفاده از روش یادگیری ماشین (ML). مجله پژوهش آب ایران. 1402؛ 18(1): 5-15.
[17] Ditlevsen O, Madsen HO. Structural reliability methods. New York: Wiley; 1996 Jan.
[19] Abdollahifar A, Nami MR. Determination of dynamic stress intensity factor in FGM plates by MLPG method. Iranian Journal of Science and Technology. Transactions of Mechanical Engineering. 2014 May 1;38(M1+):181.
[20] Kandlikar S, Garimella S, Li D, Colin S, King MR. Heat transfer and fluid flow in minichannels and microchannels. elsevier; 2005 Nov 18.
[21] Li J, Wang H, Kim NH. A new moving least square response surface method for structural reliability analysis. In53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA 2012 (p. 1967).
 
Hydrophysics
Volume 9, Issue 2 - Serial Number 17
February 2024
Pages 119-132

  • Receive Date 09 October 2024
  • Revise Date 09 November 2024
  • Accept Date 24 November 2024